Modular Product Specifications

For more detail regarding our individual product specifications, please reference the links below.

Structural Performance

Ebtech Industrial pre-engineered modular offices are designed to comply with structural requirements of the UBC, SBC, and BOCA national building codes, with regard to load-bearing design, roof deflection, and lateral load resistance. Ebtech offices can also be designed to meet earthquake zone requirements.

Fire Protection

Ebtech’s DL wall systems have gypsum board panels and commercial grade 20ga steel doors with 18ga steel frames. All components of these systems are non-combustible. The sandwich panels have been tested by Factory Mutual Testing Laboratories in accordance to ASTM-E84. The panels were found to be completely non-combustible with a flame spread of less than 25 and a smoke density of less than 20.

Electrical

AII electrical components are UL listed. The electrical handy box meets NEC (National Electric Code) requirements.

Accessibility

ADA (Americans with Disabilities Act) compliant locksets and door closers are available upon request. Ebtech’s standard doors meet the width requirements for the ADA.

State-Sealed Drawings

Drawings sealed with a professional engineer’s stamp are available upon request. We can provide sealed drawings for all fifty states.

Common Product Specifications

Several products that Ebtech Industrial supplies are common to all of our pre-engineered office systems. These items are:

Doors

Doors are 3068 commercial-grade steel with 20 gauge facings and honeycomb core. Steel door complies with ANSI/SDI 100. Each door is equipped with 1 1/2 pair of 4 1/2″ x 4 1/2″ ball bearing hinges and a stainless steel key-in handle commercial grade (ANSI A156-2) ADA lever lockset. The top half of the door is glazed with 1/4″ tempered safety glass.

The door frame for both systems is 18-gauge steel, three-piece frame, mortised to accept hinges. A commercial-quality hollow Core wood door with light oak facings is also available. Other doors are available upon request.

Windows

A fixed window is nominal 4′ wide x 3′ high. The window is glazed at the factory with 1/4″ tempered safety glass in an extruded aluminum frame. The 1/4″ tempered glass complies with ASTM C 1048 and ANSI 297.1-1984.

Ceiling

Suspended ceiling consists of commercial quality 2′ x 4′ white mineral fiber tiles supported in an intermediate duty white painted steel grid. The ceiling tiles have a CAC Rating of 35-39 and are Class A noncombustible.

Dust Cover

Dust cover shall be 22 gauge, type B, 1 1/2″ ribbed steel deck, prime painted gray. The dust cover is not designed for storage load unless noted otherwise. When load-bearing deck is required, the roof deck and structural steel components shall be pre-engineered to meet the loading requirements.

Electrical

All electrical materials supplied by Ebtech Industrial are U.L. listed and meet N.E.C. requirements. Electric package consists of 2′ x 4′, four lamp fluorescent troffer type light fixtures, 120v duplex receptacles, 120v light switch and a 100-amp load center with appropriate circuit breakers. The electric package does not include lamps or wire. Pre-Engineered Quick-Tric modular electric components are available as an option.

Options

Ebtech pre-engineered offices are available with a variety of optional features to meet specific needs and applications. Options include (but are not limited to): special wall finishes, reinforced panel Cores, special door hardware, sliding windows, special glazing, HVAC systems, flooring materials, etc.